ZL-6016F IPX7 8 Pressurized Water Immersion Test Chamber

Equipment Summary：

This test applies to electrical and electronic products that are designed to be waterproof and may be exposed to immersion in water during transport or use; the test specimens are immersed in a water tank to a specified depth and subjected to a specified pressure, and after the test, they are inspected for water ingress and any changes in performance.

Equipment Summary：

This equipment is equipped with a safety protection system that includes a pressure-protected explosion-proof device and a drainage pressure-relief device, as well as power supply overload and short-circuit protection, and audible alarm alerts.

Corresponding Standard :

IPX8 protection rating in GB 4208-2017, Degrees of Protection Provided by Enclosures (IP Code);

IPX8 protection rating in IEC 60529:2013, Degrees of Protection Provided by Enclosures (IP Code).

IPX8 protection rating in ISO 20653:2006, Road Vehicles—Degrees of Protection (IP Code)—Protection of Electrical Equipment Against Foreign Bodies, Water, and Contact;

IPX8 protection rating in GB 2423.38-2005 Environmental Testing of Electrical and Electronic Products—Part 2: Test R—Water Test Methods and Guidelines;

IPX8 protection rating in IEC 60068-2-18:2000 Environmental Testing of Electrical and Electronic Products—Part 2: Test R—Water Test Methods and Guidelines;

Technical Specifications:

Equipment Operating Conditions：

Inlet and Drain Pipe Sizes: After planning the equipment’s placement, please install the circuit breaker nearby in advance. Position the inlet and drain pipes directly below the circuit breaker. The inlet pipe (4-fen pipe, must include a valve) and the drain pipe (4-fen pipe, must run along the floor during installation)

Power Requirements: AC 220V ±10% (single-phase, three-wire), 50Hz ±10%; Power: 2 kW; Install a dedicated 32A circuit breaker with terminal blocks; power cord cross-sectional area ≥ 2.5 square.

Power Cord: Standard length is 3 meters.

Gas Supply: Users must provide their own gas supply of 5 kg or more.

Environmental Conditions: Temperature: 15°C to 35°C; Relative Humidity: 25% RH to 75% RH; Atmospheric Pressure: 86 kPa to 106 kPa.

Prohibited Uses of the Test Equipment:

1. Testing or storage of biological specimens;
2. Testing or storage of highly toxic substances;
3. Testing or storage of radioactive substances;
4. Testing or storage of corrosive substances;
5. Testing or storage of specimens that are strong sources of electromagnetic radiation;
6. Testing or storage of flammable, explosive, or highly volatile substances;
7. Testing or storage of specimens that may produce highly toxic substances during the testing or storage process.

Equipment List