Menu
This testing chamber provides a simulated environment of high temperature, low temperature, high humidity, and low humidity to detect the material and the strong attenuation degree of rubber, plastic, electronic products, etc. before and after the test. This machine can also simulate the container environment to detect the fading and shrinkage of rubber and plastic under high temperature and humidity. Test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. It is suitable for quality control inspection of factories in industries such as electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureaus, paper products, food, vehicles, auto parts, metals, chemistry, building materials and other industries.
Detailed Parameters:
| Model | ZL-80
(A~G) |
ZL-150
(A~G) |
ZL-225
(A~G) |
ZL-408
(A~G) |
ZL-608
(A~G) |
ZL -800
(A~G) |
ZL-1000
(A~G) |
| Inside Size W*H*D(cm) | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
| Outside Size W*H*D(cm) | 100x170x87 | 105x175x97 | 115x190x97 | 135x195x115 | 145x185x137 | 145x210x130 | 147x210x140 |
| Temperature Range | -70℃~+100℃(150℃)
(A:+25℃ B:0℃ C:-20℃ D:-40℃ E:-50℃ F:-60℃ G:-70℃) |
||||||
| Humidity Range | 20%~98%R.H.(10%-98%R.H/5%~98%R.H is the specific condition） | ||||||
Technical Parameter:
| Item | Description |
| Name | Temperature and Humidity Chamber |
| Model | ZL-6004 |
| Meeting Standard | ⒈ GB11158 high temperature test chamber technical conditions
⒉ GB10589-89 Low temperature test chamber technical conditions ⒊ GB10592-89 High and low temperature test chamber technical conditions ⒋ Technical conditions of GB/T10586-89 damp heat test chamber ⒌ GB/T2423.1-2008 Low temperature test chamber test method ⒍ GB/T2423.2-2008 high temperature test chamber test method ⒎ GB/T2423.3-2006 Damp heat test chamber test method ⒏ GB/T2423.4-2008 Alternating damp heat test method ⒐ GB/T2423.22-2002 Temperature change test method ⒑ IEC60068-2-1.1990 Low temperature test chamber test method ⒒ IEC60068-2-2.1974 high temperature test chamber test method ⒓ GJB150.3 high temperature test ⒔ GJB150.4 low temperature test ⒕ GJB150.9 damp heat test |
| Characteristic | Perfect shape design, high-quality appearance, low noise, simple operation, safe and reliable |
| Prohibited Items for Experimental Equipment | 1. Test or store samples of flammable, explosive and volatile substances
2. Test or store corrosive material samples 3. Test or storage of biological samples 4. Test or storage of strong electromagnetic emission source samples |
| Inner Box Size and Outer Box Size | Inner box size: (width * height * depth) 400mm*500mm*400mm
Outer box size: (width * height * depth) 900×1400×1000 mm |
| Inner Box Volume | 80L(The dimensions refer to the size table above and can be customized) |
| Temperature Range | -60℃ ~ +150℃ |
| Humidity Range | 20～98% R•H can adjusted |
| Control Stability | Temperature ±0.5℃; Humidity ±2% |
| Distribution Uniformity | Temperature ±2.0℃; Humidity ±3.0% |
| Resolution | Temperature: 0.01℃; Humidity: 0.1%R.H |
| Heating Time | Average 3℃/min, non-linear heating |
| Cooling Time | Average 1℃/min, non-linear cooling |
| Temperature Limit | The highest temperature +150℃; the lowest temperature -60℃ |
| Brief Introduction of Box Structure | The whole is divided into three combinations: the test room, the electric control cabinet, and the machine warehouse: the upper left is the test room, which is composed of the insulation layer test chamber, with a single door to the left for entry and exit; the electric control cabinet is located on the right side, and the panel It is mainly composed of a temperature controller, a switch button, and a fault protection indicator; the engine room is placed under the test room and consists of filters, solenoid valves, wiring parts, compressors and other accessories. |
| Shell Material | Steel plate of the lacquer that bake |
| Inner Box Material | SUS#304 stainless steel plate |
| Insulation Material | Polyurethane rigid foam + glass wool |
| Silicone
Foam Pressed |
1 piece of silica gel foam pressed |
| Shelf | There are 2 stainless steel shelves with adjustable height in the box |
| Heater | Use Taiwan imported stainless steel fin type radiator tube heating tube |
| Humidifier | Split humidifier design |
| Carrying the Wind Machine | motor
Stainless steel extension shaft Multi-wing fan blade aluminum alloy wind wheel Special adjustable louver air circulation system |
| Box Door | Single door, double door, embedded non-reaction flat handle
Three-layer vacuum glass to enlarge the window Electric heating automatic defogging, LED lighting |
| Water Tank | 1 built-in removable water tank (easy to clean)
1 automatic water supply pump (automatically supply water from the lower water tank to the upper level) Water shortage alarm device |
| Tripod | The bottom of the fuselage is equipped with polyurethane movable universal wheels 4pcs |
| Features of Refrigeration System | Multi-stage automatic load capacity adjustment technology
Compressor ~ French “Tecumseh” brand fully enclosed compressor Condenser ~ fin type with Taiwan-made cooling fan Evaporator ~ fin type multi-stage automatic load capacity adjustment Expansion valve ~ components imported from Europe and America Refrigerant ~ Environmentally Friendly Frozen Refrigerant Accessories ~ Desiccant, oil separator, refrigerant window, etc… |
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.