ZL-1042B Cable Bending Testing Machine

1.Product Introduction:

The cable bending tester is suitable for manufacturers and quality inspection departments to perform bending (bending) tests on cables. The test method involves fixing the cable to a clamp, which then swings left and right a certain number of times until power can no longer be supplied. The machine automatically stops operating at this point, and the total number of swings is then recorded.

2.Main Parameters:

Test Rate: Adjustable from 5 to 60 cycles/min (LED display);

Total Counter: 0 to 99999999 (preset);

Bending Angle: 5° to 180° (±90°);

Test Wire Diameter: 1 to 20mm (customizable);

Test Stations: 2 sets;

Weights: 2 each of 100/200/300/500/1000g (customizable);

Sample length: 1 meter, 600mm attached to the bending arm, weights placed 215mm below the clamping device;

24V circuit breaker detector;

Bending Guide Wheel Diameter: 50mm (customizable);

Power Supply: AC220V 50HZ ±10%;