Introduction:
The mainframe is two columns, two screws, oil cylinder under the type, tensile space is located above the mainframe, compression, bending test space is located between the mainframe lower beam and the table. The force measuring instrument adopts high-definition liquid crystal display, the experimental data is convenient and intuitive.
Introduction:
The mainframe is two columns, two screws, oil cylinder under the type, tensile space is located above the mainframe, compression, bending test space is located between the mainframe lower beam and the table. The force measuring instrument adopts high-definition liquid crystal display, the experimental data is convenient and intuitive.
The Transmission System:
The lower beam lift adopts motor through the reducer, chain drive mechanism, screw vice transmission, to achieve the adjustment of the tensile and compression space.
The Hydraulic System:
Hydraulic oil in the oil tank through the motor driven high-pressure pump into the oil circuit, flow through the high-pressure oil filter, send back the oil valve, into the cylinder. The force measuring instrument collects and analyzes the data through the sensor and displays the force value at the time. The tester controls the flow rate through the oil feeding valve to realize the speed of the test force rate.
Force Measurement System:
Support for tensile, compression, shear, bending and other tests;
Manually adjusts the oil feeding and returning valve, with simple and flexible operation;
Support test parameter customization;
Electronic force measurement, LCD display test force time curve, test force, test force peak, yield force of materials with obvious yield characteristics;
Flexible and convenient to query test results;
Equipped with a micro printer.
Safety Protection Device
When the test force exceeds 3% of the maximum test force, the overload protection, the oil pump motor shutdown.
When the piston rises to the upper limit position, limit protection, the oil pump motor stops.
When the beam descends to the set position, the limit protection and the reducer will stop.
Main Performance and Technical Indexes
|
Maximum Test Force (KN) |
600 |
|
|
Test Force Measurement Range |
4%-100% |
No staging for the whole journey, equivalent to 3 staging |
|
Relative Error of Test Force Indication Value |
＜±1% of the displayed value |
|
|
Maximum Tensile Test Space (mm) |
600 |
|
|
Compression Space (mm) |
500 |
|
|
Piston Stroke (mm) |
200 |
|
|
Distance Between Columns (mm) |
450 |
|
|
Maximum Clamping Range of Round Specimen (mm) |
Φ6-13, Φ13-Φ40 |
|
|
Maximum Clamping Thickness of Flat Specimen (mm) |
0-30 |
|
|
Max. Clamping Width of Flat Specimen (mm) |
75 |
|
|
Platen Size (mm) |
φ160mm |
|
|
The Maximum Distance Between the Two Points of the Bending Pivot Point (mm) |
300 |
|
|
Bending Support Roll Width (mm) |
140 |
|
|
Clamping Mode |
Wedge clamp clamping |
|
|
Host Size (mm) |
750*600*2100 |
|
|
Oil Source Console Size (mm) |
600×500×1250 |
|
|
Total Motor Power (KW) |
2 |
|
|
Total Weight (KG) |
1600 |
|
The Factory Standard Configuration List
|
Test machine Mainframe |
Two columns, two screws, cylinder down type |
1 set |
|
Pressure Force Sensor |
600KN |
1 only |
|
Measurement and Control Oil Source |
Proprietary technology |
1 set |
|
Electrical Control System |
Proprietary technology |
1 set |
|
Round Specimen Stretching Auxiliaries |
Φ6-13,Φ13-Φ26,Φ26-Φ40 |
Optional 2 payments |
|
Flat Specimen Tensile Assistants |
0-15mm |
1 set |
|
Compression Auxiliaries |
φ160mm |
1 set |
|
Instruction Manual, Certificate of Conformity and Packing List |
———– |
1 set |
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
