Install the sole strip test specimen on the ROSS bending tester so that the cut falls just above the center of the rotating shaft of the ROSS bending tester. The ROSS bending tester drives the test specimen to bend freely 90° on the axis. After a certain number of tests, measure the length of the cut of the test specimen and evaluate the bending resistance of the test sole based on the size of the cut growth rate.
Standard:
ASTM D1052, ISO 5423, SATRA TM60, GB/T20991-2007
Result Determination:
Observe the degree of damage and cracking of the rubber test piece.
Technical Parameters:
|
Number of Tests |
12 test pieces can be tested(At the same time) |
|
Bending Angle |
(90 ± 2) º. |
|
Winding Speed |
(100 ± 5) cpm. |
|
Twisted Axis Diameter |
(10 ± 0.05) mm. |
|
Volume |
(60x48x45) cm. |
|
Weight |
Approximately 58kg. |
|
Power Supply |
AC220V, 200W. |
Attachments:
One knife mold, one cutting blade, and one power cord.
Machine manual, internal calibration certificate, and warranty card.
Additional Purchase: Linear punch.
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
