ZL-6033 Independent Temperature Control Precision Oven

Products

ZL-6033 Independent Temperature Control Precision Oven

Product Description:

It is mainly used for high-temperature testing, drying, baking, and disinfection of non-volatile and non-flammable and explosive samples. It can also be used for general constant temperature test work. It is an essential equipment for laboratories and scientific research units.

This product has the following characteristics:

1.Using the block assembly structure, the surface uses epoxy powder electrostatic spraying technology;

2.Using digital display, digital setting temperature, can reduce visual reading error and operation error;

3.With independent over-temperature protection, over-current protection and other functions.

 

Product Description:

It is mainly used for high-temperature testing, drying, baking, and disinfection of non-volatile and non-flammable and explosive samples. It can also be used for general constant temperature test work. It is an essential equipment for laboratories and scientific research units.

This product has the following characteristics:

1.Using the block assembly structure, the surface uses epoxy powder electrostatic spraying technology;

2.Using digital display, digital setting temperature, can reduce visual reading error and operation error;

3.With independent over-temperature protection, over-current protection and other functions.

 

Control Method:

Balanced temperature control system (BTC) + specially designed fan forced air circulation system, control SSR by P.I.D., so that the heating amount of the system is equal to the amount of heat loss, so it can be used stably for a long time.

 

Technical Parameter:

At room temperature 25 ℃, no load:

Temperature Range

room temperature +10℃~+260℃

Temperature Fluctuation

±0.5℃

Temperature Uniformity

±1.5%℃

Heating Rate

heating rate ≥ 4-6℃/min. room temperature to 200℃ heating rate ≤ 45 minutes

Internal Dimensions

W830×H370×D475×4 mm

External Dimensions

W2100*H1500*D720 mm (subject to actual product)

 

Product Structure:

Inner Box Material

Stainless steel plate

Outer Box Material

Iron plate paint (Beige color)

Cavity Structure

Four-chamber combination, upper two lower two, each cavity independently controls the temperature and time, the control box is located above the machine

Control Method

7-inch touch screen control, four-chamber independent control, independent operation

Thermal

Insulation Material

High-density glass fiber thermal insulation cotton

Urgent

8 high temperature resistant

Intake and Exhaust

Air Outlet

The exhaust air outlet is diameter: Ф100mm, located directly behind the machine

Exhaust Port

Integrated exhaust motor duct., independent exhaust system, and then collect exhaust air at the place where the body is lower than the lower oven

Wind Circulation Mode

Motor rear, horizontal circulation mode

Storage Rack

A layer of storage rack at the bottom of the box

Heater

Use Taiwan imported stainless steel finned radiator U-shaped heating tube

Box Door

Clear touch button handle.

Alarm

The alarm device is unified as:three-color lamp with sound and light

Over-Temperature Protection

Over-temperature and working temperature are displayed as digital display. When the circulating fan fails or exceeds the over-temperature set temperature, the device will alarm and automatically disconnect the heating system

Free Quote & Information Request

Leave your inquiry, we will provide you with quality products and services!

Free Quote & Information Request

Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.

ZL-6033 Independent Temperature Control Precision Oven