Applicable Places:
Check Broken Needles: To check the broken needles of shoe materials, women’s wear, men’s wear, student clothes, overalls, baby products, knitwear, underwear, socks, fabrics, non-woven fabrics, embroidery, towels, bath towels, gloves, toys, handicrafts, etc.
Through the Inspection Needle: hardware button, metal zipper, Japanese word buckle, bead chain, brooch and other clothing handbags metal accessories through the needle machine.
Technical Parameters:
|
Detection Width
|
400mm
|
|
Detection Height
|
100mm 150mm 200mm
|
|
Testing Standards
|
Fe ø ≥0.8mm ≥1.2mm ≥1.5mm
|
|
Conveying Speed
|
25~30m/min
|
|
Power
|
100W
|
|
Voltage
|
220V
|
|
Weight
|
150KG ~ 180KG
|
|
Volume(Length × Width × Height)
|
1330 × 920 × 567 (mm)
|
Note: The sensitivity is determined by the detection height (ie channel or gantry) to determine the detection accuracy. The higher the gantry, the lower the sensitivity. The above corresponding height and detection standard are the detection results in the empty machine state; the detection channel height and width can be customized according to requirements!
Features:
1.The body adopts the full-tube steel frame electrostatic spraying process, the frame is stable, the grounding force is large, the anti-interference is better, the impact resistance is the same, More durable than the traditional needle detector adopts the angle iron and the ABS plastic or aluminum alloy wing-making needle detector.
2.Super anti-interference computer chip integrated circuit, two sets of 24 sets of sufficient sensors, equivalent to the traditional double probe needle detector;
3.All function keys are light touch membrane switches, which avoids the disadvantages of mechanical buttons being easily damaged;
4.With position display function, the six-point part shows the exact broken needle position function;
5.Has a counting function, distinguishing between good and bad products (qualified, total, detected);
6.The alarm function is three kinds of sound, light and stop machine. Sensitivity 1~10 level adjustment;
7.Special protection circuit, no object to pass through the automatic shutdown for 10 minutes;
8.All function settings are completed after the main power is turned on, without starting the motor;
9.With B / C (accessory / finished product) mode switching function, adapt to the needle inspection of different products;
10.When a broken needle or an iron object is detected, two sound and light alarm modes are detected, and the machine is stopped and returned to the starting point, and automatically runs again;
11.High sensitivity, when detecting the height of the gantry is 12cm, the small iron filings with a diameter of 1.0mm are detected, and the nine-point test method does not miss the inspection.
