ZL-3212 Battery Low Altitude Simulation Test Chamber

1.Product name: Battery Low Altitude Simulation Test Chamber

2.Product overview:

The test chassis for UL, EN, IEC and other standard test requirements and design, in a short period of time to reach the low-pressure storage of samples, the test cycle can be automatically controlled throughout the monitoring of barometric pressure changes, automatic termination of the test. Simulated batteries and battery packs are stored for 6 hours at or below 11.6 kPa and ambient temperature of (20 ± 5) ° C, with no bleed, no venting, no disintegration, no rupture and no ignition, and each The open circuit voltage of a test battery or battery after the test is not less than 90% of the voltage of the test battery prior to the simulation test.

3.Meeting standard:

GB / T 31485-2015, GB / T 31241-2014, UN38.3, IEC62133, QC / T743-201X, GB / T 8897.4-2008,

GB / T 21966-2008,

4.Equipment technical parameters:

1, the inner box material: SUS201 # stainless steel, thickness 3mm;

2, the outer box material: A3 cold plate paint, thickness 1.5mm;

3, the pressure range: 0.5 ~ 100Kpa, commonly used test pressure 11.6 Kpa;

4, the size of the box: W400xH400xD400mm

5, carton size: W550xH1200xD550

6, the partition material: stainless steel;

7, the degree of vacuum display: Digital display vacuum gauge control, accurate display of vacuum, easy to set the degree of vacuum;

8, the timer: LED digital display, freely set in 0-9999H can be (H / M / S seconds to switch);

9, pressure fluctuations: ≤ 5%;

10, equipment power supply: AC380V, 50HZ, 2.2KW;

11, the use of laboratory temperature must be controlled (20 ℃ +5 ℃), in order to reach the test box temperature requirements.