ZL-3202 Battery Explosion-proof Testing Machine

Usage:

Battery explosion-proof box is mainly used for battery over-charge and over-discharge test. The battery is put in the explosion-proof box, connected to external charge and discharge tester. The operator and equipment are under protection.

Standard:

GB  31241-2014  Safety requirements for lithium ion batteries and battery pack for portable electronic product

GB/T 18287 -2013 General specification for lithium ion batteries for cellular telephones External short circuit requirements

GB/T 8897.6-2008 The sixth part of the primary cell: safety requirements of lithium batteries

YD/T 2366.1-2011 The first part of lithium iron phosphate batteries for communication: integrated batteries

GB/T 21966-2008  Safety requirements for lithium primary batteries and storage battery in transit

MT/T 1051-2007  Lithium ion battery for miner’s lamp

YD 1268-2003  Safety requirements and test methods for lithium batteries and chargers of mobile communication handsets

GB/T  19521.11-2005  Safety specification for hazardous features inspection of dangerous cargo of lithium batteries

YDB 032-2009  Backup lithium ion battery for communication

UL 1662:2012  Standard for lithium battery

UL 2056: 2012  Household and commercial batteries

UN38.3(2012)  The third part of Recommendations on the transport of dangerous goods – Test and standard manual

IEC62133-2012  Safety requirements for storage batteries with alkaline or non acid electrolytes

Specification and Parameter:

1.Size of each test case :500*500*500mm（L*W*H）;(or customized)

2.Material quality: outer container:3mm A3 steel plate with stoving varnish ,  inner container: SUS#201 stainless steel

3.Single door, double layer door, the inner door is made of stainless steel material.The front observation window is not available.

4.The door is connected with the box body by a strong hinge,explosion proof door lock

5.The side convection window: open a 200 x 300mm hatch at each side of each box (also can only open the front and back side), in order to abstract heat and convection. With stainless steel mesh, it can prevent explosion and splash effectively.

6.Put a electric board or affix the Teflon tape inside the test box,effective for inflaming retarding and insulation , easy to clean.

7.Open two circular mounting ports at the rear part of each box, which is convenient for the testing and connecting wires to pass through.

8.There is a separate test panel to control the lighting and exhaust of each test room.Smoke detection alarm is available, when there is a fire, the exhaust fan would be turned on automatically;