ZL-3060 Touch Screen Control Building Materials Flammability Test Furnace

Scope of use：

Touch screen control building materials flammability test furnace uses a stainless steel box, which is based on the old JCK-2 products, new touch screen control, sample controllable automatic lifting, Bunsen lights can be adjusted to upgrade, is strictly based The high-profile building materials burning grade test instrument produced by the national standard GB8626-2007. (The red part is the parameter that the third-party testing unit now accepts the mandatory requirements).

The building material flammability test furnace measures the flammability of the building product by directly impacting the vertically placed sample with a small flame in a normal combustion environment. The flammability test furnace for building materials utilizes the German Kleinbrenner principle to measure the combustion properties of Class B building materials under direct direct impact of small flames in the vertical direction (it’s for the combustion properties of building materials / flame retardant grade B Level judgment).

Applicable Standard: 

ISO11925-2:2002 E Test method for flammability of building materials

Design Standards： 

GB/T8626-2007 Test method for flammability of building materials

Technical Parameters:

Product Features:

1. It is ergonomically designed and operated. All tests are completed by touch screen operation. The degree of automation is high. The results of previous tests can be stored and the previous test data can be read.
2. The servo motor driven sample rack can be controlled to automatically lift;
3. Bunsen burner can be adjusted in advance and retreat;

4.1.5mm stainless steel plate case;

5.2 fan steel heat-resistant glass door double angle observation test, double (with lock) convenient and practical

6. High-pressure automatic ignition, durable combustion;
7. The ignition source can be automatically tilted by 45 degrees;
8. The flame height is adjusted by a precision regulating valve;
9. The sample holder can be moved up and down and back and forth;
10. Equipped with two sample holders.
11. Flame measurement scale;
12. High degree of automation, accurate and easy to operate experimental data;
13. Box size: w*d*h835*400*815mm
14. Material: 1.5mm stainless steel
15. The bottom of the box is a flat natural vent, and the vent is composed of a 5cm*5cm square vent (a true 1.5mm thick steel vent, 50mm high) to keep the airflow through.
16. Workmanship, true solderless process
17. Touch the display:
18. Size: 7 inches Effective display size Length 15.5cm Width 8.6cm;
19. Resolution: 800*480
20. Communication interface RS232, 3.3V CMOS or TTL, serial port mode
21. Storage capacity: 1G
22. Use pure hardware FPGA driver display, “zero” startup time, run on power
23. Using M3+FPGA architecture, M3 is responsible for instruction parsing, FPGA focuses on TFT display, speed and reliability are leading the same scheme
24. The main controller adopts a low-energy processor and automatically enters the energy-saving mode.