This machine is used to test the rebound performance of rubber products after a certain time and pressure. Take the standard test pieces, lay them flat on the test plate, sandwich them between the two plates of this unit, take them out after the specified time, release the test pieces and cool them down, measure the final center thickness of the test pieces respectively, and substitute into the formula to find the compression rebound rate.
Equipment Overview:
This machine is used to test the rebound performance of rubber products after a certain time and pressure. Take the standard test pieces, lay them flat on the test plate, sandwich them between the two plates of this unit, take them out after the specified time, release the test pieces and cool them down, measure the final center thickness of the test pieces respectively, and substitute into the formula to find the compression rebound rate.
Standard:
ASTM-D395, ASTM 3574, GB-7759, JIS-K6262
Products:
Static Compression Test Used To Test Rubber.
Features:
Material selection of quality 304 # stainless steel, durable.
Test Principle:
Take the standard test piece, sandwiched between the plane of the plate, with the screw rotates, compressed to a certain percentage, and then put in the oven of a certain temperature (optional), and taken out after a predetermined time, remove the test strip, cool for 30 minutes, measuring its thickness, compressed into the formula seeking skewness.
Sampling Requirements:
|
Foamed Plastic |
50 × 50 × 25mm |
|
Results Found |
Measuring its thickness, compressed into the formula seeking skewness. |
Technical Parameters:
|
Specimen |
Foam plastic 50 × 50 × 25mm |
|
Volume |
20 × 12 × 10cm |
|
Weight |
About 11kg |
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
