ZL-3011B Open-Close Type Banbury Mixer

Features and Uses:

(Special for the laboratory) It can automatically control the temperature and time system, the operation is precise and convenient, and the mixing can achieve the best dispersion and uniformity; the mixing tank is pourable, and the stirring shaft adopts dry mechanical shaft seal to prevent leakage, which makes cleaning and color changing easy Simple and easy; this sealed mixing tank can not only ensure the mixing of products, but also prevent environmental pollution; the machine is durable, low failure rate, easy to install, operate and maintain, and save electricity.

Applicable products: EVA foam soles, rubber soles, TPR soles, rubber rollers, rubber sponges, tires, sports balls, etc.

Product use: Rubber, plastic and chemical raw materials mixing and processing Lightweight, high-efficiency, energy-saving and environment-friendly modern rubber and plastic refining equipment

Introduction of Main Parameters:

1. Volume of mixing chamber: 0.5L/1L/3L/5L can be customized
2. Main motor: AC motor with a power of 3.7 kilowatts
3. Reducer: the base and frame are made of low carbon steel structure, with a forced lubrication circulation system;
4. Rotor: Two-edge, synchronous rotor structure (can also be designed and manufactured according to the rotor structure diagram provided by the user), the speed ratio of the front and rear rotors is 1:1.20 or the specific parameters of the ST synchronous rotor can be customized free of charge according to customer needs, cast steel quenched and tempered hardened Treatment, the surface is hard chrome plated; the bearing is a ball shaft roller bearing; the bearing lubricating oil bath; the rotor speed: 0.5L: 36 rpm The specific speed can be customized free of charge according to customer needs
5. Facing wall: steel structure, drilling heating, inner surface hardening and hard chrome plating;
6. Bracket: steel structure, hard chrome plating on the inner surface;
7. Top bolt: driven by cylinder, hard chrome plated on the surface
8. End face seal: the seal ring is made of high wear-resistant material, self-lubricating bearing, hinge spring pressure top seal
9. Hopper: manual operation
10. Control mode: the operation is divided into manual and semi-automatic;

Internal mixer temperature: standard internal mixer is tap water temperature — normal temperature +10°-300° high temperature internal mixer has done 650° mechanical main body

11. The base and the frame are welded by section steel and steel plate, and processed
12. The middle tank of the mixing chamber is made of wear-resistant alloy steel

The side wall is made of medium carbon steel plate welded and processed

13. Stirring shaft, shaft and blades are made of alloy steel
14. The bearing seat is made of ZG20 steel, and the bearing is made of roller bearing
15. Feeding device This machine is designed as a front feeding device, and the pressure can be adjusted arbitrarily according to the user-specified air valve
16. Leak-proof device The side end of the stirring shaft is tightened by a mechanical shaft seal, and the leak-proof structure has won the certificatePressure cap device
17. Pressure cover Made of alloy steel, pressure is applied to the raw material during the kneading operation, and the air cylinder is used for vertical lifting actionUnloading Device
18. Structure Opening and closing of the mixing chamber for discharging
19. Unloading method: side panels, mixing chamber W grooves can be flexibly opened and quickly disassembled in 1 minute
20. Unloading power: driven by cylinder or manuallyTransmission structure
21. Main motor 3.7KW AC voltage 440V 415V 380V 220V 110V can be selected according to customer needs
22. Transmission mode The main motor and reducer are conjoined transmissionPiping
23. Air pressure piping Compressed air fittings (three-point combination, solenoid valve) and mechanical body pipingMain electrical control equipment
24. Temperature setting: both automatic and manual
25. There are reminder actions, various time settings, and can realize positive and negative rotation

Advantages of the machine

26. The main electrical parts are imported brands, and the bearings of the whole machine adopt Timken TWB brand
27. The stirring shaft is made of alloy steel. The parts that are easy to wear are welded with wear-resistant steel imported from West Germany, which is more fastening and durable
28. The mixing tank is “mountain” type, the main body of the mixing tank is made of wear-resistant alloy steel for overall processing, and the shearing part is surfacing welded with West German front steel
29. The side wall leak-proof device adopts high-tech materials: the leak-proof structure won the certificate
30. The pressure cover adopts “M” structure, which makes the mixing of rubber materials more uniform
31. Volume: (W×D×H) 1520*400*590MM
32. Weight: 450KG