Application:
This machine is mainly used for bending test; the sample is fixed on the fixture and bent repeatedly at the specified bending angle and times to determine the bending strength.
Technical Parameters：
|
Model |
ZL-2830 |
|
Test station |
One |
|
Test Angle |
10-150 degrees (touch screen number setting) |
|
Test speed |
10-120 times / min (touch screen number set) |
|
Test fixture |
Left fixture and right fixclamp |
|
Test number counter |
0～999999 |
Operating steps:
Clip it with the test sample
Secure the sample to the left fixture
Adjust the required position of the right fixture according to the sample specifications
Adjust the fixture to the appropriate test position through the left side knob (e. g. adjust the bending position to the turntable center, etc.)
Turn on the power switch, enter the operation interface, and set relevant parameters (angle, speed, etc., etc.)
After the arrival, the machine stops automatically
Conduct the next test and repeat the above steps
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
