ZL-2726 Automatic Springback Tester-Dongguan Zhongli Instrument Technology Co., Ltd.

Products

Execution standards: IEC60861.3, GB/T4074.3; Inspection standards: JB/T4279.4
Used to detect the resilience of enameled round wires with a nominal conductor diameter of 0.080mm and above and 1.600mm and below
Automatically stop after 5.5 turns of winding
There is no need to adjust the sensor for samples of various specifications
High sensitivity, good repeatability and easy operation
The deviation between the displayed value and the indicated value on the dial shall not exceed

±1°.

The coil slowly releases when rebounding, without sudden rebound or sudden jump.
Patented design
Common to round wire and flat wire
10-inch touch all-in-one computer
Can be equipped with a QR code scanner and inductive trigger scanning
WIFI network support, detection results are automatically uploaded to the database or user MES system
All test data and spool product information can be automatically transmitted to the host computer, and automatically saved and analyzed by the “QME Enameled Wire Quality Management System”

Execution standards: IEC60861.3, GB/T4074.3; Inspection standards: JB/T4279.4
Used to detect the resilience of enameled round wires with a nominal conductor diameter of 0.080mm and above and 1.600mm and below
Automatically stop after 5.5 turns of winding
There is no need to adjust the sensor for samples of various specifications
High sensitivity, good repeatability and easy operation
The deviation between the displayed value and the indicated value on the dial shall not exceed

±1°.

The coil slowly releases when rebounding, without sudden rebound or sudden jump.
Patented design
Common to round wire and flat wire
10-inch touch all-in-one computer
Can be equipped with a QR code scanner and inductive trigger scanning
WIFI network support, detection results are automatically uploaded to the database or user MES system
All test data and spool product information can be automatically transmitted to the host computer, and automatically saved and analyzed by the “QME Enameled Wire Quality Management System”

The Main Technical Parameters:

Examination Range	Nominal diameter 0.080~1.600mm enameled round wire
Rebound, Winding Speed	7±0.5r/min
Input Power	220V±10% 50HZ
Power Consumption	≤80W
The deviation between the displayed value of resilience and the numerical value on the dial shall not be greater than ±1 degree.
Dimensions	530×330×650mm
Weight	25kg