The metal wire twisting tester is suitable for measuring the ability of a metal wire with a diameter (or feature size) of 0.1-10.0 mm to withstand plastic deformation in a one-way or two-way twisting and to display defects on the surface and interior of a wire material (actually with a 0.06-3 mm test fixture. ).
Working principle:
One-way twisting: The sample is rotated 360 degrees in one direction around its own axis as a twist to the specified number of times or the sample breaks.
Bidirectional twisting: The sample is rotated 360 degrees in one direction around its own axis as a single twist until the specified number of times, then rotated in the opposite direction the same number of times or the sample is broken.
Main purpose:
The metal wire twisting tester is suitable for measuring the ability of a metal wire with a diameter (or feature size) of 0.1-10.0 mm to withstand plastic deformation in a one-way or two-way twisting and to display defects on the surface and interior of a wire material (actually with a 0.06-3 mm test fixture. ).
Applicable standards:
The metal wire twisting tester is applicable to the People’s Republic of China Standard GB/T 239.1-2012 “One-way torsion test method for the first part of metal material wire”, also applicable to the international standard ISO 7800:2003 “One-way torsion test method for metal wire rod” and ISO 9649:1990 “Two-way twisting test method for metal wires”.
Specimen:
The test piece shall be as straight as possible and straightened if necessary, but it shall not injure the surface or distort the test piece. In order to make the test specimen straight during the test, some kind of tension should be applied. The tension should not be greater than 2% of the corresponding force value of the nominal tensile strength of the test wire. The axial force is increased by the weight. force.
Technical Parameters:
1, Can hold the diameter of metal wire 0.1 ≤ d (D) <5
2, The gauge length between two clamps ≤500mm
3, Jaw clamp specific outer diameter 74mm
4, Jaw clamping range 0.1-1mm, 1mm-5mm
7, Torsion speed 30,60,90; 120; 180; 300r/min
8, Speed error <±10%
9, Minimum number of turns reading 0.1
10, Two chucks coaxiality (mm) <φ0.4
11.Parallelism of moving rail (mm) <0.2
12, Jaw hardness (HRC) >55
13, Test machine size (length * width * height) about 980 × 400 × 600mm
14, Machine weight (net weight) about 150kg
15, Power supply AC 220V 50Hz
16.Noise <50 dB(A)
17,Aassembly quality in line with national standards GB/T2611
18, Packaging, transportation in line with the Ministry of Machinery standards JB/T6147
19,Working method : Automatic loading
20.Display : LCD screen Chinese character menu display
© Dongguan Zhongli Instrument Technology Co., Ltd.
Leave your inquiry, we will provide you with quality products and services!
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we’re ready to start working on your new project, contact us now to get started.
