ZL-1835 Glove Melt-resistant Metal Impact Tester

Main Uses:

Produced according to the relevant standards, mainly used for welding gloves and other kinds of anti-molten metal spatter burns the human body fabrics and composite fabrics anti-molten metal impact performance testing, widely used in special labor protective equipment supervision and inspection stations, safety production science research institutes, product quality inspection institutes, welding clothing production enterprises.

Main Features：

1. Oxygen and acetylene flow regulator can provide standard gas flow for welding nozzle.
2. Oxygen and acetylene pressure regulator can precisely control the inlet pressure to 250Kpa and 50Kpa.
3. Oxyacetylene torch is used to melt the metal bar, the caliber of welding nozzle (1.2±1)mm.
4. Adopt stepping motor to drive the metal bar, and can set the running speed of the metal bar.
5. Melt drop guide mechanism, with high temperature anti-stick guide groove, the angle is 45 degrees.
6. Fabric temperature sensor device, including melt-resistant insulating rock wool support block.
7. And armored platinum resistance, for measuring the temperature rise of the back of the specimen.
8. Weighted copper hammer device for setting the fabric pre-tension 175g ± 5g;
9. Temperature rise data can be automatically recorded, the number of melt drops recorded by the testers themselves.
10. PLC touch screen operation control.
11. Different standards specific, the configuration is not the same, to the actual configuration shall prevail.

Main Indicators：

Applicable Standards：

GB/T38306-2019、FZ/T 73040-2010、GB38453-2019、GB17599

EN407、EN 348