ZL-6039 Motor Vehicle Battery Testers Explosion-proof High and Low Temperature Chamber

Project

Clarification

Basic Product Introduction

Name

Explosion-proof High and Low Temperature Chamber

Model

ZL-6039

Quantity

1 unit

Brand

Zhongli Instrument

Meet standards

GB11158 High temperature test chamber technical conditions

GB10589-89 low temperature test chamber technical conditions

GB10592-89 High and low temperature test chamber technical conditions

GB/T2423.1-2008 Test Methods for Low Temperature Chamber

GB/T2423.2-2008 Test methods for high-temperature test chambers

GB/T2423.22-2002 Temperature change test method

IEC60068-2-1.1990 Test methods for low temperature test chambers

IEC60068-2-2.1974 Test methods for high temperature test chambers

GJB150.3 High temperature test

GJB150.4 Low temperature test

Description of use

   This tester provides high and low temperature simulation environment to test the material and strength degradation of rubber, plastic and electronic products before and after the test. This machine can also simulate the container environment, in order to detect the rubber, plastic in high temperature and high humidity, color fading, shrinkage. Test various materials for heat resistance, cold resistance, dry resistance and humidity resistance. Suitable for electronics, electrical appliances, batteries, universities, research institutes, inspection and quarantine bureaus, paper products, food, vehicles, automobile parts, metal, chemical, building materials and other industries, factories and units of quality control testing.

Specificities

Perfect modeling design, high quality appearance, low noise, easy to operate, safe and reliable.

Performance indicators

Inner box size

(W*H*D)800mm*850mm*600mm

Outer box size

(W*H*D)1300×1850×1150 mm

Box volume

408L

Temperature range

-70℃ ~ +150℃

Control stability

Temperature ≤±0.5℃; Humidity ≤±2

Distribution uniformity

Temperature ≤±1.5℃;

Warming time

3°C/min, non-linear no-load temperature rise (temperature rise range: -40°C ~ +60°C)

Cooling time

3℃/min, non-linear no-load cooling (cooling range: +60℃~-40℃)

Temperature limit

Maximum temperature +150°C; minimum temperature -70°C

Box structure

Brief introduction of box structure form

The whole is divided into, test room, electronic control cabinet, machine warehouse three combinations: the left side of the upper part of the test room, by the insulation layer of the test room liner, to the left of the single-door type entry and exit; electronic control cabinet is located on the right side, the panel is mainly composed of temperature controllers, switches, switch buttons, failure to protect the combination of indicators; machine warehouse placed under the test room, by the filters, solenoid valves, wiring, compressors, and other parts of the composition.

Shell material

Steel plate baking paint

Inner box material

SUS # 304 stainless steel plate;

Insulation material

100mm rigid polyurethane foam or fiberglass, flame and fire resistant, environmentally compatible

Box door

Hinged single door, in order to prevent condensation or frost on the edges of the door frame and door during the low temperature test, the door frame and door edges are equipped with an electric defrosting device;

seal up

The door and frame of the test chamber are sealed with double silicone rubber strips, which are resistant to high and low temperatures, anti-aging and have good sealing performance.

Viewing window

The single door is equipped with a heat-proof and sweat-proof 3-layer vacuum glass observation window, and the surface is free of frost and condensation during any test.

lighting

1 LED AC220V energy saving lamp, window mounted, explosion-proof and moisture-proof

Test hole

The body is equipped with 1 Φ100mm hole, 1 soft plug and 1 hole cover. It can be used for external test power line or signal line.

Caster

The bottom of the machine is equipped with 4 sets of high quality fixable universal movable wheels (for easy movement) and leveling feet (for adjusting the balance of the machine).

Nitrogen insertion port

Add a nitrogen inlet on the right side of the unit

Smoke evacuation equipment

A 50 mm diameter manual smoke evacuation device is located on top of the unit.