ZL-2307 Falling Sand Wear-Resistant Testing Machine

●Equipment Overview:

The sand drop wear tester is used to test the wear resistance of organic coatings (such as aluminum plastic composite panels or metal paint, automotive paint, etc.) under standard conditions. Allow a certain size of sand particles to fall onto the test sample from the specified height through the conduit until the substrate is exposed. Measure the amount of sand required to damage the paint film and evaluate the wear resistance of the paint film based on the standard amount of sand used per unit coating thickness.

Manufacturing strictly in accordance with GB/T 23988-2009 "Determination of Abrasion Resistance of Coatings - Sand Drop Method" and ASTM D 968, precise control of dimensional deviation of each component, and the main components are made of advanced wear-resistant stainless steel.

The funnel adopts a fan-shaped switch design, which is more convenient (other suppliers use plug-in type).

The height of the conduit and test panel frame is adjusted with the equipped special tools, making it more accurate.

The height of the sand shaker can be flexibly adjusted up and down through the lower bearings.

●Main Technical Parameters: