Sponge Foam Repeated Compression Life Tester
Theory:
The Sponge Foam Repeated Compression Life Tester apply to test rate of permanent deformation of plastic foam material.After repeatedly compress specimen, check recovery level in stipulated, we can get permanent deformation rate, user can set test times and test machine will automatic stop after reach setting times.
Put the specimen between two compression plates. Compress the specimen to 50% of its original
thickness with the reciprocating compression speed of 60 times per minute till reaching 80000 times .Then the
specimen is put aside for 30 minutes prior to measuring the thickness. The permanent deformation rate can then
be calculated.
Technical parameters:
Specification | ISO-7214 , JIS-K6767 , K6382 |
Specimen(L×W×D) | 50×50×25mm |
Compression speed | 60cpm |
Stroke | 0~50mm ( adjustable) |
Distance between compression plates | about 200mm (adjustable) |
Area of compression plate | 30×30cm |
Lower compression pate | breathing holes 289 pcs ,pitch of holes 19mm |
Dimension(W×D×H) | 60×40×75cm |
Weight | 102kg |
Power | AC 220V 5A |