ZL-2009 Sponge Repeated Compression Life Testing Machine
1.Introduction:
This machine tests the permanent deformation rate of foamed plastics.
Quoting standards ISO 7214, JIS K6767, K6382: After accurately measuring the thickness of the test piece, as for the test machine to compress between the flat plates, compress the height of the test piece by 50% at a frequency of 60 times per minute, and set it at room temperature after reciprocating compression up to 80,000 times. After placing for 30 minutes, measure the thickness to convert the compression deformation rate
2.The main technical parameters
1. Compression stroke |
0~50mm (adjustable) |
2. Platen spacing |
about 100mm (adjustable) |
3. Platen area |
30*30cm |
4. Motor |
1/3 HP |
5. Counter |
LCD, 0~999,999 |
6. Test piece |
(50X50)mm/(100X100)mm thickness 20mm |
7. Weight |
102kg |
8. Power supply |
1∮, AC220V, 5A |