ZL-2003 Office Chair Rotation Durability Tester
1.Introduction:
Suitable for all types of chairs with swivel seat. The motor drives the test platform to rotate, and the frequency converter controls the rotation speed and speed conversion of the motor at multiple speeds; precise pressure regulation ensures stable and reliable output force of the cylinder; the output end of the cylinder is equipped with a universal joint to adapt to different angles of chair surfaces; simple clamping structure, automatic Alignment, no vertical force on the legs of the chair, simulating the real state; the height of the output force of the cylinder is adjustable to adapt to different chair heights.
2.Reference Standard:
QB/T 2280-2007, BIFMA X5.1-2011, EN 1335:2000 standard related requirements
3.The Main Parameters:
1. Digital display rotation frequency RPM |
5~15CPM |
2. Rotation angle |
optional arbitrary angle repeated rotation or unidirectional rotation working mode |
3. Cylinder output |
158.5KgF |
4. The mechanical structure ensures that the eccentric distance between the load force of the seat frame and the air pressure rod is 2 inches |
|
5. Counting range |
0-999999, with stop and power off memory function |
6. Height of bearing surface (seat cushion) |
350~800mm |
7. Diameter of turntable |
740mm |
8. Power supply (power) |
single-phase 220V/50Hz/3A |
9. Air source |
air pressure ≥0.5MPa; flow rate ≥800L/min; air source is filtered and dried |
10. Main body size |
1200*1000*1680mm (length*width*height) |
11. Weight |
212kg |
12. Standard configuration accessories (delivery) |
1 set of chair center positioning template / 1 set of seat surface loading pad and universal joint |
4.Control System:
1. Touch screen with PLC, with power-off memory function;
2. With breakpoint protection (alarm) function, deceleration motor + frequency conversion control;
3. Manual pressure regulation, SMC precision barometer;
4. Counter stop/power off memory function;
5. Dial the knob to select any or 360 degree rotation mode.