ZL-4008 Needle detector probe (on-line detector)
Features:
1, Japanese technology, computer chip integrated circuit.
2. The machine has extremely high sensitivity and anti-interference performance, and can be used for a long time. The detection effect can reach 100% according to the regulations.
3. When the broken needle or iron object is detected, sound and light alarm will be sent out, and stop signal will be output.
4. If metal foreign body is detected, the corresponding light on the gantry will be on, indicating the approximate location of the metal foreign body
5. The upper and lower two sets of probes are composed of multiple columns of magnetic sensors, which can greatly avoid detection blind area
6, sensitivity 1-100 level adjustment.
Related parameters:
Body material |
channel steel exquisite painting process |
Overall dimension |
3500×600×900mm(length × width × height);(the size is subject to the actual customized size) |
Weight |
about 320Kg |
Power voltage |
220V ac |
Frequency |
50HZ |
Work rate |
60W |
Alarm mode |
audible and visual alarm, and output stop signal |
Speed requirements |
support low speed 2.5-10 m/min |
Sensitivity |
diameter of iron ball ≥1.0 ~ 1.2mm |