Solid Densimeter
1.Manufacturer
2. 1 year after sale
3. fast delivery
Use: Liquid Densimeter
Application
Rubber,Plastic,Wire and Cable,Tire,Powder,Ceramic,Magnetic Material,
Hard Alloy,New Material.
Field of quality management,cost control, rapid density test in site.
Standards
According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,GB/T5163,GB/T 1933 standards etc.
No need to open and close the lid with the uni case aluminum alloy measuring table; Simple operation and conform to the new materials laboratory operation specification; automatically judge whether the sample is qualified or not; Function of warning and measuring the volume abrasion value DIN of rubber,of Akron,and expansible; Measuring the true density with pycnometer method for powder material; Function of waterproofing treatment with boiling saturation method,impregnated saturation method,vacuum saturation method,surface sealing wax covering method,and surface Vaseline covering method,and automatic measuring the porosity,oil content and water absorption; The purity of the main material in two kinds of mixture also can be measured.
Specification
Mode: ZL-300M ZL-600M ZL-900M ZL-1200M
Resolution: 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3
Maximum weigh: 300g 600g 900g 1200g
Minimum weigh: 0.005g 0.005g 0.01g 0.01g
Measuring range: 0.001—99.999g/cm3
Features
No need to open and close the lid; Simple operation;Shorter time; According to the specification of new materials laboratory.
Show the percentage composition of mixed samples for researching and developing new materials.
Automatically judge whether the sample is qualified or not and prompt alarm.
Function of automatic zero tracking,buzzer warning,and overload warning.
Function of solution compensation.necessary if liquid other than water is used as a medium for measuring.
Function of setting actual water temperature,measuring medium density,and water proof medium density.
Function of setting aerobatic buoyancy compensation and the bound of density.
Adopt the unease high-capacity measuring accessories with the transparent
injection mold tank,which can resist wear,fall off,and corrosion.
Adopt the unease dedicated wind and dust cover,which makes the combination convenient and durable
Interface of RS-232C is included.the printer of DE-40 is available to connect PC with printer.
Standard Accessories
Host,Tank,Testing board ,Tweezer,Thermometer,100G weight,Wind and dust cover,A set of measuring grain accessories,A set of measuring floating body accessories,Power Transformer
Measuring Procedure of Non-hydroelectricity Products
Place sample on testing board to measure weight in air,and then press ENTER button to memory.
Place the sample into water to measure weight in water,and then press the ENTER button to memory. Density value is displayed.
Measuring Procedure of Hydroelectricity Products
Place sample on the testing board to measure weight in air,and then press the ENTER button to memory. Place sample that did waterproof treatment into water to measure weight in water, and then press the ENTER button to memory. Density value is displayed.
