ZL-1824 Helmet Stiffness Performance Tester
Main purpose
It is produced according to relevant helmet standards and is mainly used to test the stiffness performance of various helmets such as motorcycle helmets, sports helmets, electric vehicle helmets, fire helmets, rescue helmets, military and police helmets, and pilot helmets. It is widely used in related production, scientific research, quality supervision and testing units of various helmets.
Main features
1. The main unit structure is single-column structure, moving up and down linearly
2. The test process is controlled by touch screen + PLC + special test program. The program is automatically controlled, using a dedicated motor and controller, and the speed does not need to be manually adjusted. The program is automatically adjusted according to the test situation, and the test data and results are automatically judged and processed.
3. Test hold The test procedure is automatically closed-loop controlled, and the constant force value is automatically maintained for 2 minutes. There is no need to manually adjust according to the change of the force value.
4. Real-time display of force value, time, displacement, deformation, speed, test curve, etc. during the test.
5. Different standards and helmet configurations are slightly different, and the specific configurations are subject to actual purchases.
Main indicators
|
Force range |
0～2000N, accuracy 1%. |
|
Displacement range |
0-500mm, accuracy 0.1mm. |
|
Timing range |
0-99min, accuracy 0.1s. |
|
Test speed |
0-500mm/min when no load, stepless variable speed can be adjusted. It is convenient to quickly adjust the position according to the size of the helmet. During the test, load 50N/min and unload 100N/min automatically switch according to the test process. |
|
Rigidity plate |
The metal plate has a hardness of 45HRC and a diameter of 150mm. |
|
Power supply |
AC220V, 50Hz. |
Applicable standards
GB811, GB24429, GB/T 38305, GJB1564A
GA/T44, GA293, GA294, GA295, GA296
