ZL-7064 Footwear torsion tester

1. Purpose

This machine is mainly used to test all kinds of torsional strength tests of finished shoes.

2. Principle

lFix the sole on the test platform, adjust the position of the platform, use manual positioning to lift the shoe to a certain angle, and then twist the shoe to test the maximum torque experienced by the shoe during the test again.                        

3.Standards

GB/T 32024-2015.

4.Parameter

1. Test capacity: 50N • m

2. Power resolution: 1 / 50,000

3. Control system: PLC control

4. Heel lifting angle: 25 ± 0.5 ° (0 ~ 40 ° can be set)

5. Torsion angle: 0 ~ ± 40 ° can be set

6. Angle resolution: 0.1 °

7. Speed: 0 ~ 5rad / min can be set

8. Volume: 1360 × 440 × 900mm

9. Weight (approximately): 65kg

10. Power supply: 1∮ 220V 50Hz

5. Pictures: