ZL-7057 Eyelet and Shoelace Abrasion Tester
Scope of application:
This machine is suitable for all types of shoelaces and shoe eyes. Pass a section of the shoelace through the shoe eye clamped by a woven board. The shoelace and the shoe eye are at 90°, and the woven board and shoelace are 45 °, and then tighten the shoelace under standard tension, and repeatedly pull back and forth through the eye of the shoe. When the shoelace is damaged, stop the test, which conforms to the SATRA-TM93 technical basis.
Product specifications:
|
Station |
6 groups |
|
Knock the code |
(45±55)g |
|
Stroke |
(76±2) mm |
|
Woven dimension board |
(25×25×3) mm |
|
Eye hole |
ф4.5mm |
|
Volume |
(55×56×40) cm |
|
Power supply |
1∮, AC 220V, 3A |
