ZL-8015 Electro-hydraulic pressure testing machine
Introduction:
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test,
also used to test the compressive performance of other materials.
Spatial adjustment method:
Through the hand wheel rotation, the adjustment of space to achieve compression.
Hydraulic System:
The oil tank is sucked through the filter screen and be inhaled pump oil ,through the petroleum pipeline of oil pump transport to
oil valve,When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank,
when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and
through oil return valve to tank.
Control system:
This machine adopts hydraulic loading, electronic measuring force, with a load of figures, the loading rate shows ,the maximum load
to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Fixture:
Whole set fixtures include: a set compression platen fixture
Main performance technical specifications:
Max load |
2000kN |
2000kN |
3000kN |
Test force measuring range |
4%-100%FS |
||
Test Force showed the relative error |
≤indicating value±1% |
≤indicating value±1% |
<indicating value±1% |
silk pole adjustment method |
Manual operation |
power-driven |
power-driven |
Test Force Resolution |
0.01kN |
0.01kN |
0.01kN |
Hydraulic pump rated pressure |
40MPa |