ZL-8012 Full-automatic pressure testing machine 300KN
Introduction:
ZL-8012 The testing machine is mainly used for brick, stone, cement, concrete
and other building materials, compressive strength test.
Hydraulic System:
System including digital servo valve, high-precision sensors, controllers and software, high control precision and reliability.Meet GB, ISO, ASTM and other standards for cement, mortar, concrete and other materials testing requirements.
Control system:
System including digital servo valve, high-precision sensors, controllers and software, high control precision and reliability.Meet GB, ISO, ASTM
and other standards for cement, mortar, concrete and other materials testing requirements.
System has the following functions:
Closed-loop control with force;
Can achieved constant loading rate or constant stress loading rate;
Adopt computer for electronic measurement, automatic test;
Computer automatically calculates the results and print reports.picture 1 picture 2
Test reports can be to self-design and exported to Excel picture 3
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Main performance technical specifications:
Max load KN |
300 |
Test force measuring range KN |
4%-100%FS |
Test Force showed the relative error |
≤indicating value±1% |
Test Force Resolution |
0.01kN |
Hydraulic pump rated pressure |
25MPa |
Loading rate |
0.3KN/S~10KN/S |
Error loading speed |
±5% |
Pump rated flow |
1.52L/min |
Upper and lower bearing plate size |
φ155mm |
Maximum distance between the upper and lower plate |
260mm |
Piston diameter |
φ130mm |
Piston stroke |
60mm |
Motor Power |
3 phase 0.75 kW |
Outside dimension mm |
870×450×1400mm |
weight |
450Kg |